MIXER ORIZZONTALI TERMOCONDIZIONATI E ISOLATI HL 25
UTILIZZO
Miscelatori progettati per uso alimentare, e in particolare per mescolare acqua e farina.
CARATTERISTICHE
Chiusino superiore di ispezione DN 500 mm con griglia, micron di sicurezza e tiranti adatti, alla pressione di utilizzo.
N. 1 Valvola di sicurezza tarata a 0,4 Bar
N. 1 Bocchello DN 25 per la messa in pressione
N. 1 Valvola rompivuoto
N. 1 Bocchello DN 50 sulla pancia del serbatoio per ripresa CIP
Valvola di sfiato aria DN 100 con rete e doccia per abbattimento polveri
N. 2 ganci di sollevamento
N. 2 Bocchelli filettati di carico acqua DIN 11851 – DN 100 per inserimento Vs. teste di lavaggio
N. 1 Bocchello filettato DIN 11851 – DN 50 per carico acqua
N. 1 Bocchello flangiato DN 200 per carico farina
N. 1 Elettroagitatore orizzontale pot. 9,2 kw – 20 rpm
Intercapedine di raffreddamento/riscaldamento 2000 x 2500 mm posta sulla parte inferiore del cilindro del serbatoio e composta da doppia lamiera gonfiata con vie obbligate di ricircolo del glicole, con lamiera interna da 30/10 AISI 316L e lamiera esterna da 10/10, entrata e uscita posteriori con manicotti da 1” ¼. Pressione di collaudo 12 bar, pressione di esercizio 3/4 bar
N. 1 Pozzetto per sonda di temperatura da 1/2″
Isolamento sui 2/3 inferiori dei fondi e del cilindro con lana minerale e rivestimento esterno in lamiera inox spessore 2 mm con giunture saldate stagne e satinate di serie
N. 1 Bocchello flangiato DN 150 per scarico prodotto
N. 4 gambe fisse predisposte con piastre per Vs. celle di carico
Disponibili 3 pezzi nuovi (mai utilizzati).
Per informazioni:
Dr. Piero Berto
Milk Italy
Via Copernico, 62 I-36034 Malo (VI)
M. +39.335.17.444.87
[email protected]
- Miscelazione
Нет видео
THERMOCONDITIONED AND INSULATED HORIZONTAL MIXER HL 25
USE
Mixers designed for food use, and in particular for mixing water and flour.
FEATURES
Upper inspection manhole DN 500 mm with grid, safety micron and tie rods suitable for the operating pressure.
N. 1 Safety valve set at 0.4 Bar
N. 1 nozzle DN 25 for pressurizing
N. 1 Vacuum breaker valve
N. 1 DN 50 nozzle on the belly of the tank for CIP recovery
DN 100 air vent valve with net and shower for dust suppression
N. 2 lifting hooks
N. 2 threaded water inlets DIN 11851 – DN 100 for inserting your washing heads
N. 1 Threaded nozzle DIN 11851 – DN 50 for water loading
N. 1 DN 200 flanged nozzle for flour loading
N. 1 Horizontal electric agitator pot. 9.2 kw – 20 rpm
Cooling / heating gap 2000 x 2500 mm placed on the bottom of the tank cylinder and composed of double inflated sheet with forced ways of glycol recirculation, with 30/10 AISI 316L internal sheet and 10/10 external sheet, inlet and rear outlet with 1 ”¼ sleeves. Test pressure 12 bar, operating pressure 3/4 bar
N. 1 Well for 1/2 “temperature probe
Insulation on the lower 2/3 of the bottoms and of the cylinder with mineral wool and coating external in 2 mm thick stainless steel sheet with standard welded, watertight and satin joints
N. 1 DN 150 flanged nozzle for product discharge
N. 4 fixed legs prepared with plates for your load cells
3 new pieces available (never used).
For information:
Dr. Piero Berto
Milk Italy
Via Copernico, 62 I-36034 Malo (VI)
M. +39.335.17.444.87
[email protected]
- Mixing
Нет видео
THERMOCONDITIONED AND INSULATED HORIZONTAL MIXER HL 25
USE
Mixers designed for food use, and in particular for mixing water and flour.
FEATURES
Upper inspection manhole DN 500 mm with grid, safety micron and tie rods suitable for the operating pressure.
N. 1 Safety valve set at 0.4 Bar
N. 1 nozzle DN 25 for pressurizing
N. 1 Vacuum breaker valve
N. 1 DN 50 nozzle on the belly of the tank for CIP recovery
DN 100 air vent valve with net and shower for dust suppression
N. 2 lifting hooks
N. 2 threaded water inlets DIN 11851 – DN 100 for inserting your washing heads
N. 1 Threaded nozzle DIN 11851 – DN 50 for water loading
N. 1 DN 200 flanged nozzle for flour loading
N. 1 Horizontal electric agitator pot. 9.2 kw – 20 rpm
Cooling / heating gap 2000 x 2500 mm placed on the bottom of the tank cylinder and composed of double inflated sheet with forced ways of glycol recirculation, with 30/10 AISI 316L internal sheet and 10/10 external sheet, inlet and rear outlet with 1 ”¼ sleeves. Test pressure 12 bar, operating pressure 3/4 bar
N. 1 Well for 1/2 “temperature probe
Insulation on the lower 2/3 of the bottoms and of the cylinder with mineral wool and coating external in 2 mm thick stainless steel sheet with standard welded, watertight and satin joints
N. 1 DN 150 flanged nozzle for product discharge
N. 4 fixed legs prepared with plates for your load cells
3 new pieces available (never used).
For information:
Dr. Piero Berto
Milk Italy
Via Copernico, 62 I-36034 Malo (VI)
M. +39.335.17.444.87
[email protected]
- Mixing
Нет видео
THERMOCONDITIONED AND INSULATED HORIZONTAL MIXER HL 25
USE
Mixers designed for food use, and in particular for mixing water and flour.
FEATURES
Upper inspection manhole DN 500 mm with grid, safety micron and tie rods suitable for the operating pressure.
N. 1 Safety valve set at 0.4 Bar
N. 1 nozzle DN 25 for pressurizing
N. 1 Vacuum breaker valve
N. 1 DN 50 nozzle on the belly of the tank for CIP recovery
DN 100 air vent valve with net and shower for dust suppression
N. 2 lifting hooks
N. 2 threaded water inlets DIN 11851 – DN 100 for inserting your washing heads
N. 1 Threaded nozzle DIN 11851 – DN 50 for water loading
N. 1 DN 200 flanged nozzle for flour loading
N. 1 Horizontal electric agitator pot. 9.2 kw – 20 rpm
Cooling / heating gap 2000 x 2500 mm placed on the bottom of the tank cylinder and composed of double inflated sheet with forced ways of glycol recirculation, with 30/10 AISI 316L internal sheet and 10/10 external sheet, inlet and rear outlet with 1 ”¼ sleeves. Test pressure 12 bar, operating pressure 3/4 bar
N. 1 Well for 1/2 “temperature probe
Insulation on the lower 2/3 of the bottoms and of the cylinder with mineral wool and coating external in 2 mm thick stainless steel sheet with standard welded, watertight and satin joints
N. 1 DN 150 flanged nozzle for product discharge
N. 4 fixed legs prepared with plates for your load cells
3 new pieces available (never used).
For information:
Dr. Piero Berto
Milk Italy
Via Copernico, 62 I-36034 Malo (VI)
M. +39.335.17.444.87
[email protected]
- Mischen
Нет видео
THERMOCONDITIONED AND INSULATED HORIZONTAL MIXER HL 25
USE
Mixers designed for food use, and in particular for mixing water and flour.
FEATURES
Upper inspection manhole DN 500 mm with grid, safety micron and tie rods suitable for the operating pressure.
N. 1 Safety valve set at 0.4 Bar
N. 1 nozzle DN 25 for pressurizing
N. 1 Vacuum breaker valve
N. 1 DN 50 nozzle on the belly of the tank for CIP recovery
DN 100 air vent valve with net and shower for dust suppression
N. 2 lifting hooks
N. 2 threaded water inlets DIN 11851 – DN 100 for inserting your washing heads
N. 1 Threaded nozzle DIN 11851 – DN 50 for water loading
N. 1 DN 200 flanged nozzle for flour loading
N. 1 Horizontal electric agitator pot. 9.2 kw – 20 rpm
Cooling / heating gap 2000 x 2500 mm placed on the bottom of the tank cylinder and composed of double inflated sheet with forced ways of glycol recirculation, with 30/10 AISI 316L internal sheet and 10/10 external sheet, inlet and rear outlet with 1 ”¼ sleeves. Test pressure 12 bar, operating pressure 3/4 bar
N. 1 Well for 1/2 “temperature probe
Insulation on the lower 2/3 of the bottoms and of the cylinder with mineral wool and coating external in 2 mm thick stainless steel sheet with standard welded, watertight and satin joints
N. 1 DN 150 flanged nozzle for product discharge
N. 4 fixed legs prepared with plates for your load cells
3 new pieces available (never used).
For information:
Dr. Piero Berto
Milk Italy
Via Copernico, 62 I-36034 Malo (VI)
M. +39.335.17.444.87
[email protected]
- Mezcla
Нет видео
THERMOCONDITIONED AND INSULATED HORIZONTAL MIXER HL 25
USE
Mixers designed for food use, and in particular for mixing water and flour.
FEATURES
Upper inspection manhole DN 500 mm with grid, safety micron and tie rods suitable for the operating pressure.
N. 1 Safety valve set at 0.4 Bar
N. 1 nozzle DN 25 for pressurizing
N. 1 Vacuum breaker valve
N. 1 DN 50 nozzle on the belly of the tank for CIP recovery
DN 100 air vent valve with net and shower for dust suppression
N. 2 lifting hooks
N. 2 threaded water inlets DIN 11851 – DN 100 for inserting your washing heads
N. 1 Threaded nozzle DIN 11851 – DN 50 for water loading
N. 1 DN 200 flanged nozzle for flour loading
N. 1 Horizontal electric agitator pot. 9.2 kw – 20 rpm
Cooling / heating gap 2000 x 2500 mm placed on the bottom of the tank cylinder and composed of double inflated sheet with forced ways of glycol recirculation, with 30/10 AISI 316L internal sheet and 10/10 external sheet, inlet and rear outlet with 1 ”¼ sleeves. Test pressure 12 bar, operating pressure 3/4 bar
N. 1 Well for 1/2 “temperature probe
Insulation on the lower 2/3 of the bottoms and of the cylinder with mineral wool and coating external in 2 mm thick stainless steel sheet with standard welded, watertight and satin joints
N. 1 DN 150 flanged nozzle for product discharge
N. 4 fixed legs prepared with plates for your load cells
3 new pieces available (never used).
For information:
Dr. Piero Berto
Milk Italy
Via Copernico, 62 I-36034 Malo (VI)
M. +39.335.17.444.87
[email protected]
- Mélange
Нет видео
THERMOCONDITIONED AND INSULATED HORIZONTAL MIXER HL 25
USE
Mixers designed for food use, and in particular for mixing water and flour.
FEATURES
Upper inspection manhole DN 500 mm with grid, safety micron and tie rods suitable for the operating pressure.
N. 1 Safety valve set at 0.4 Bar
N. 1 nozzle DN 25 for pressurizing
N. 1 Vacuum breaker valve
N. 1 DN 50 nozzle on the belly of the tank for CIP recovery
DN 100 air vent valve with net and shower for dust suppression
N. 2 lifting hooks
N. 2 threaded water inlets DIN 11851 – DN 100 for inserting your washing heads
N. 1 Threaded nozzle DIN 11851 – DN 50 for water loading
N. 1 DN 200 flanged nozzle for flour loading
N. 1 Horizontal electric agitator pot. 9.2 kw – 20 rpm
Cooling / heating gap 2000 x 2500 mm placed on the bottom of the tank cylinder and composed of double inflated sheet with forced ways of glycol recirculation, with 30/10 AISI 316L internal sheet and 10/10 external sheet, inlet and rear outlet with 1 ”¼ sleeves. Test pressure 12 bar, operating pressure 3/4 bar
N. 1 Well for 1/2 “temperature probe
Insulation on the lower 2/3 of the bottoms and of the cylinder with mineral wool and coating external in 2 mm thick stainless steel sheet with standard welded, watertight and satin joints
N. 1 DN 150 flanged nozzle for product discharge
N. 4 fixed legs prepared with plates for your load cells
3 new pieces available (never used).
For information:
Dr. Piero Berto
Milk Italy
Via Copernico, 62 I-36034 Malo (VI)
M. +39.335.17.444.87
[email protected]
- Mixing
Нет видео
THERMOCONDITIONED AND INSULATED HORIZONTAL MIXER HL 25
USE
Mixers designed for food use, and in particular for mixing water and flour.
FEATURES
Upper inspection manhole DN 500 mm with grid, safety micron and tie rods suitable for the operating pressure.
N. 1 Safety valve set at 0.4 Bar
N. 1 nozzle DN 25 for pressurizing
N. 1 Vacuum breaker valve
N. 1 DN 50 nozzle on the belly of the tank for CIP recovery
DN 100 air vent valve with net and shower for dust suppression
N. 2 lifting hooks
N. 2 threaded water inlets DIN 11851 – DN 100 for inserting your washing heads
N. 1 Threaded nozzle DIN 11851 – DN 50 for water loading
N. 1 DN 200 flanged nozzle for flour loading
N. 1 Horizontal electric agitator pot. 9.2 kw – 20 rpm
Cooling / heating gap 2000 x 2500 mm placed on the bottom of the tank cylinder and composed of double inflated sheet with forced ways of glycol recirculation, with 30/10 AISI 316L internal sheet and 10/10 external sheet, inlet and rear outlet with 1 ”¼ sleeves. Test pressure 12 bar, operating pressure 3/4 bar
N. 1 Well for 1/2 “temperature probe
Insulation on the lower 2/3 of the bottoms and of the cylinder with mineral wool and coating external in 2 mm thick stainless steel sheet with standard welded, watertight and satin joints
N. 1 DN 150 flanged nozzle for product discharge
N. 4 fixed legs prepared with plates for your load cells
3 new pieces available (never used).
For information:
Dr. Piero Berto
Milk Italy
Via Copernico, 62 I-36034 Malo (VI)
M. +39.335.17.444.87
[email protected]
- Mistura
Нет видео
THERMOCONDITIONED AND INSULATED HORIZONTAL MIXER HL 25
USE
Mixers designed for food use, and in particular for mixing water and flour.
FEATURES
Upper inspection manhole DN 500 mm with grid, safety micron and tie rods suitable for the operating pressure.
N. 1 Safety valve set at 0.4 Bar
N. 1 nozzle DN 25 for pressurizing
N. 1 Vacuum breaker valve
N. 1 DN 50 nozzle on the belly of the tank for CIP recovery
DN 100 air vent valve with net and shower for dust suppression
N. 2 lifting hooks
N. 2 threaded water inlets DIN 11851 – DN 100 for inserting your washing heads
N. 1 Threaded nozzle DIN 11851 – DN 50 for water loading
N. 1 DN 200 flanged nozzle for flour loading
N. 1 Horizontal electric agitator pot. 9.2 kw – 20 rpm
Cooling / heating gap 2000 x 2500 mm placed on the bottom of the tank cylinder and composed of double inflated sheet with forced ways of glycol recirculation, with 30/10 AISI 316L internal sheet and 10/10 external sheet, inlet and rear outlet with 1 ”¼ sleeves. Test pressure 12 bar, operating pressure 3/4 bar
N. 1 Well for 1/2 “temperature probe
Insulation on the lower 2/3 of the bottoms and of the cylinder with mineral wool and coating external in 2 mm thick stainless steel sheet with standard welded, watertight and satin joints
N. 1 DN 150 flanged nozzle for product discharge
N. 4 fixed legs prepared with plates for your load cells
3 new pieces available (never used).
For information:
Dr. Piero Berto
Milk Italy
Via Copernico, 62 I-36034 Malo (VI)
M. +39.335.17.444.87
[email protected]
- Mixing
Нет видео